4. Reinstall the range hood’s bottom cover and stainless steel
baffle filters.
5. Reinstall the oil container.
6. Turn on the power and check the operation of the fans and
light.
6. Dismantling, Cleaning and Re-assembly
NOTE
1. Whenever dismantling, re-installing or maintaining the
range hood, always make sure that the power ir off.
2. When dismantling, re-installing or cleaning the hood,
always wear latex or rubber gloves for safety.
3. Never spill or spray water or any other liquid on or inside
the motors.
4. If any or power cord is damaged, please contact the after
sales service, distributors or qualified technicians for repair.
DO NOT attempt to repair the range hood by yourself.
5. Before dismantling, cleaning and re-installing the hood,
please make sure that you know the name, quantity and
location of any dismantled parts, so as to avoid loss and
mis-installlation.
To Next Page
Loading...
Need help?
General
