5. Installation instructions
1. Turn off the electricity on the circuit panel, use a voltmeter
in order to confirm that the power source has been shut off,
so as to prevent electrocution.
2. If you have to move the range to install the hood, turn off
the power for the electric range, or shut off the gas to a gas
stove.
3. Confirm that the distance (clearance) between the range
surface and bottom of the range hood is 26"-30". (need 30"
if use GAS stove.)
4. Please see Fig(5) to find detailed information about the
shape, position and size of the range hood and the exhaust
hole that you need to open.
5. Confirm whether the range hood can be attached firmly
to the cabinet; otherwise install wooden straps on either
side of the bottom of the cabinet for mounting the range hood.
Electrical power provision:
1. The range hood comes with two locations for the wiring
to pass through. Choose the location that is best suited for
your wiring situation.
2. Confirm that the wiring does not affect the level nor the
stability of the range hood.
To Next Page
Loading...
Need help?
General
