EasyManua.ls Logo

Empava EMPV-JT319 User Manual

Empava EMPV-JT319
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MASSAGEBATHTUB
EMPV-JT319
Question and Answer IconNeed help?

Do you have a question about the Empava EMPV-JT319 and is the answer not in the manual?

Empava EMPV-JT319 Specifications

General IconGeneral
MaterialAcrylic
Dimensions59" L x 30" W x 28 3/8" H
Installation TypeFreestanding
Drain LocationCenter
ShapeRectangular
ColorWhite
Warranty1 year limited warranty

Summary

Introduction

Preparation before installation

Precautions for installation

Size chart

Installation instruction

Inspection before installation

Check the bathtub for leaks and functionality before final installation.

Adjust the leveling feet

Ensure the bathtub is level for proper operation and to prevent noise.

How to connect the water?

Connect the hot and cold water hoses to the bathtub and plumbing.

How to connect the electricity?

Properly connect the bathtub to the power supply via a dedicated grounded plug.

Precautions for use

Operation

Two-piece set faucet

Instructions for operating the two-piece set faucet for water flow and temperature control.

Multi-function handheld shower

How to adjust water patterns and use the handheld shower with back flow protector.

Water jets use

Adjusting water force and angle for the different water jets.

Hydro massage flow rate control switch

Adjust water column strength using the hydro massage flow rate control switch.

Drainage

Manual drainage procedure for the bathtub, including drain cover and valve operation.

GD-371 Control panel operation

Guide to operating the GD-371 computer control panel for various functions.

Care and Maintenance

General care guidelines

Follow guidelines for preventing freezing, water use, and environmental protection.

Cleaning procedures

Use mild detergents for cleaning and alcohol for stubborn stains; maintain plating parts.

Plating parts maintenance

Restoring luster to plating parts using sandpaper and polishing agents.

Troubleshooting guide

Solutions for common problems like pump not starting, flow rate issues, and water leaks.

Related product manuals