The Information screen (‘i’ icon) – shows information such as the unit
serial number, supplier’s contact details for service and also records and
displays the total number of shocks performed by the applicator, the
selected tip and the membrane. This is useful for knowing when to replace
the tip, membrane cap or applicator element.
Whenever a tip, membrane cap or applicator element is replaced its
selected counter should be zeroed by pressing the green ‘ ’ button.
The Time Setting screen (double click on the time display) allows the user
to set the correct time. Press ‘Enter’ to save and return to the main screen.
To Next Page
Loading...
Need help?
General
