Need help?Do you have a question about the EMS DOLORCLAST and is the answer not in the manual?
General| Portability | Portable |
|---|---|
| Application | Musculoskeletal disorders |
| Pressure | 1 – 5 bar |
| Probe Types | Focused |
| Display | LCD |
Details the manual's purpose, source language, and importance of following instructions.
Explains the shock wave therapy technique, its benefits, and application.
Overview of the DOLORCLAST® Radial Shock Waves system and its function.
Lists all the parts provided with the device for setup.
Step-by-step guide for securely placing the console on its cart or a surface.
Instructions for connecting the equipotential conductor for safety.
How to properly connect the handpiece to the main console unit.
Guidance on safely connecting the device to a power source.
Procedure for powering on the device and its console.
Explanation of the console screen layout, buttons, and indicators.
Accessing device software versions and handpiece usage data.
Steps to change the device's display language, with a note on factory reset.
Proper procedure for powering down the device safely.
Steps for preparing the patient, including medical history and contraindications check.
Guide to adjusting key parameters for effective treatment.
Detailed instructions on how to conduct the actual treatment session.
Overview of predefined treatment protocols available on the device.
How to choose and apply a specific preset treatment protocol.
Modifying preset protocols to customize treatment parameters.
Procedure to save customized settings as new default protocols.
Using modes to enhance patient comfort and tolerance during treatment.
Modes that automatically increase pressure gradually during treatment.
Modes that alternate frequencies to prevent tolerance and enhance stimulus.
Instructions for cleaning and disinfecting the handpiece after each treatment.
Guidelines for ensuring applicators are clean and disinfected before use.
Recommended procedure for cleaning and disinfecting the console unit.
Detailed maintenance for the handpiece, including piston and O-ring replacement.
Maintenance procedures for the console, specifically fuse replacement.
Details on the device's electromagnetic emissions and compliance standards.
Information regarding the device's resistance to electromagnetic interference.
Guidelines for safe operating distances from RF transmitting equipment.
To Next Page
