OM265EN issue 16
11
Do not allow the leads to contact the body work or top panel of the
equipment during use
The electrode cables and plugs may get hot when used at high
output levels for prolonged periods. Allow to cool after treatment
before disconnecting.
Therapy shall be performed by qualified personnel trained and/or
experienced in the use of this device as outlined in an appropriate
training program.
Electromagnetic interference: This device may cause
electromagnetic interference to electronic devices
The emissions characteristics of this device make it suitable for use
in industrial areas and hospitals (CISPR 11 class A). If it is used in a
residential environment (for which CISPR 11 class B is normally
required) this device might not offer adequate protection to radio-
frequency communication services. The user might need to take
mitigation measures, such as relocating or re-orienting the
equipment.
This device is suitable for use in hospital environments except for
near active HF surgical equipment or in the RF shielded room of
magnetic resonance imaging equipment where the intensity of EM
disturbances is high.
To Next Page
Loading...
Need help?
General
