EasyManua.ls Logo

EMS MEGAPULSE SENIOR 265 - Appendix A - Technical Specification

EMS MEGAPULSE SENIOR 265
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OM265EN issue 16
39
Appendix A - Technical Specification
General
Power Input 100-240 Vac 50/60 Hz
Classification (EN60601-1) Class 1, Type BF
Mains Fuses 2 x T10A 250V (5 x 20 mm)
Size (height x width x depth) 940 x 470 x 470 mm
Weight 38 kg (excluding electrodes)
Treatment Programs 10 user-defined set-ups
Shortwave
Frequency 27.12 MHz
Maximum Output Power 400 W in continuous mode
1000 W peak in pulsed modes
Modes Continuous, 3 in 3, 2 in 3 and 1 in 3
Pulse Frequency 5 - 800 Hz
Pulse Width 20 - 400 µs
Tuning Automatic
Treatment Timer 0 to 30 minutes
The Megapulse Senior 265 is designed to operate from any 50/60 Hz
single phase supply between 100 and 240 Vac capable of supplying
1 kVA. Connection is via an IEC socket at the rear of the unit.
All information on model, serial number, and month/year of
manufacture is located on the rear panel.
Each Megapulse Senior 265 is supplied with a detachable mains
cable, spare fuses, a pair of 100mm capacitive electrodes, output
tester and this manual.
WARNING – Class 1 equipment - to prevent electric shock connect
to protective earth.

Related product manuals