OM265EN issue 16
31
‘Clinic’ opens a QWERTY keypad which allows you to write in a
name which will appear at the top of the screen.
‘Maintenance’ is intended for use by service engineers and gives
access to diagnostic information. It requires a pass code to access.
Fig. 20 Maintenance screen
‘Monopulse Tuning’ is greyed out and non-functional unless a
Monopulse applicator is connected and selected. It opens a page
with a bar graph that aids the adjustment and tuning of Monopulse
applicators (by setting minimum reflected power).
Fig. 21 Tuning screen
To Next Page
Loading...
