6
30 VDC
Always check that the unit is installed in a safe and stable position. A possible fall may suddenly pull
on the cord and the handpiece, hurting the patient and the user, and damaging the unit.
Check that the rated voltage of the power supply corresponds to the local line voltage to prevent
damaging the unit.
Use the unit only in a FI protected mains supply (FI = Residual current protection).
For USA or Canada: connect only to a Hospital Grade outlet.
Install the external fi lter of water before connecting the hose to the water supply.
Connect the unit to a water supply with the original Hu-Friedy & EMS water hose supplied with your product.
It is recommended to use an independent water supply.
Connecting the unit
To Next Page
Loading...
