EMX CR-2000 - Factory Reset and Status Indicator

CR-2000 Instructions Rev 1.5 9
Date 6/28/2018
8
0
#
8
1
#
Programming (Continued)
Restore Factory setting
12. Restore factory settings
12.1 Disconnect power
12.2 Press the # button
12.3 Restore power while holding the # button for 4 seconds
12.4 The CR-2000 will beep twice
12.5 Release the # button
12.6 Reset should be complete
Note: Restoring to factory setting will not delete user(s) data.
13. Status indicator
3.1 Press to turn off RED indicator flash in light bar
3.2 Press to turn on RED indicator flash in light bar