Setting up Wireless LAN
Enter the name for your wireless network SSID (the default is ENCORE59FE74) and
security key (default is 1234567890). Move and point your mouse over to the
security level blocks from the weakest (red block) to the strongest (green block), and
click on the selected block to select the level of security you desired. The “Key” type
will depend on the wireless security you selected. If you choose WEP as the wireless
security you will be prompted whether an ASCII or Hexadecimal is your preferred key
type. Hexadecimal requires 10 character digits on the KEY: field.
Click
to proceed
24
To Next Page
Loading...
Need help?
General
