- Demilitarized Zone (DMZ)
If you have a client PC that cannot run an Internet application (e.g. Games)
properly behind the NAT firewall, then you can open up the firewall restrictions to
unrestricted two-way Internet access by defining a DMZ Host. The DMZ function
allows you to re-direct all packets going to your WAN port IP address to a
particular IP address in your LAN. The difference between the virtual server and
the DMZ function is that the virtual server re-directs a particular service/Internet
application (e.g. FTP, websites) to a particular LAN client/server, whereas DMZ
re-directs all packets (regardless of services) from your WAN IP address to a
particular LAN client/server.
Enable DMZ: Enable / Disable DMZ
LAN IP Address: Fill-in the IP address of a particular host in your LAN Network
or select a PC from the list on the right that will receive all the
packets originally from the WAN port/Public IP address.
Click <Apply> at the bottom of the screen to save the above configurations.
- Denial of Service (DoS)
57
To Next Page
Loading...
Need help?
General
