Fill in the "Description" , "Local IP", "Local Port", "Protocol" and “Public Port”
of the setting to be added and then click <Add> button. Then this Virtual
Server setting will be added into the "Current Port Forwarding Table"
below. If you find any typo before adding it and want to retype again, just
click <Reset> and the fields will be cleared.
Remove Port Forwarding
If you want to remove Port Forwarding settings from the "Current Port
Forwarding Table", select the Port Forwarding settings you want to
remove in the table and then click "Delete Selected". If you want to remove
all Port Forwarding settings from the table, just click the <Delete All>
button. Click <Reset> will clear your current selections.
Click <Apply> at the bottom of the screen to save the above configurations.
- Port Triggering (Special Applications)
Some applications require multiple connections, such as Internet games, video
Conferencing, Internet telephony and others. In this section you can configure
the router to support multiple connections for these types of applications.
68
To Next Page
Loading...
Need help?
General
