UNPACKING AND SETUP
This chapter provides unpacking and setup information for ENCORE 802.11g
Wireless USB 2.0 Adapter.
Unpacking
Open the box of the 802.11g Wireless USB 2.0 Adapter and carefully unpack it.
The box should contain the following items:
One 802.11g Wireless USB 2.0 Adapter
One Driver & Utility CD-ROM
If any item is found missing or damaged, please contact your local reseller for
replacement.
Setup
The setup of the 802.11g Wireless USB 2.0 Adapter can be performed using the
following steps:
Visually inspect the USB connector and make sure that it is fully plugged in to
the system’s USB port.
Make sure that there is a well environment that there is no much intrusion to
have a better connection.
To Next Page
Loading...
Need help?
General