14
SAFETY AND INSTRUCTIONAL
DECALS
• Keep all safety signs legible. Remove all
grease, dirt and debris from safety signs
and instructional labels.
• Replace all worn, damaged, or missing
safety signs.
• When replacement components are
installed, be sure that current safety signs
are affixed to the replaced components.
• If an attachment or accessory has been
installed, make sure current safety signs
are visible.
• New safety signs may be obtained from
your authorized Encore equipment dealer.
• Safety signs may be affixed by peeling off
the backing to expose the adhesive
surface. Apply only to a clean, dry surface.
Smooth to remove any air bubbles.
• Familiarize yourself with the following safety
signs and instructional labels. They are
critical to the safe operation of your
machine.
363023 8303 463576
8008 463798 463799
To Next Page
Loading...
