Copyright © 2015 by Endecotts Ltd.
Setting Up
Electrical connections
* The voltage and frequency for the Titan 450 is given
on the rating label.
* Ensure that the values agree with the existing power
supply.
* Connect the Titan 450 to the power supply using the
connection cable provided.
* When connecting the power cable to the mains
external fusing is necessary according to the
regulations of the installation location
Do not connect to any other supply other than stated on the rating label,
otherwise electrical and mechanical components can be damaged.
Ambient temperature: 5°C to 40°C
If the ambient temperature is exceeded or drops below the specified value
the electrical and mechanical components may become damaged and the
performance data can change to an unknown degree.
Atmospheric humidity:
Maximum relative humidity 80% at temperatures up to 31°C, with linear
reduction down to 50% relative humidity at 40°C.
At high atmospheric humidity the electrical and mechanical components
may become damaged and the performance data can change to an
To Next Page
Loading...