Endless Pools E500 - User Manual

Questions and Answers

K
Keith CooperAug 15, 2025
Why is the water cloudy in my Endless Pools E500?
- K
  Kimberly LoveAug 15, 2025
  Cloudy water in your Endless Pools Fitness Equipment can result from several factors: * Dirty filters * Excessive oils or organic matter * Improper sanitization * Suspended particles or organic matter * Overused or old water To resolve this, try cleaning the filters, shocking the fitness system with sanitizer, adding sanitizer, adjusting the pH and/or alkalinity to the recommended range, running the jet pump(s) and cleaning the filters again. If the problem persists, consider draining and refilling the fitness system.
J
Justin HolderAug 18, 2025
What to do if my Endless Pools E500 has a water odor?
- M
  Mackenzie McconnellAug 18, 2025
  If your Endless Pools Fitness Equipment has a water odor, it could be due to excessive organics in the water, improper sanitization, or low pH. To address this, try shocking the fitness system with sanitizer, adding more sanitizer, and adjusting the pH to the recommended range.
E
Eric MckeeAug 21, 2025
How to get rid of algae growth in my Endless Pools Fitness Equipment?
- G
  Gregory ParkerAug 21, 2025
  Algae growth in your Endless Pools Fitness Equipment is often due to high pH or low sanitizer levels. To combat this, shock the fitness system with sanitizer and adjust the pH. Also, shock the fitness system with sanitizer again and maintain the proper sanitizer level.
J
Jody NicholsonAug 25, 2025
What causes eye irritation in my Endless Pools E500 and how to fix it?
- T
  Tiffany DeanAug 25, 2025
  Eye irritation in your Endless Pools Fitness Equipment is typically caused by low pH or low sanitizer levels. To resolve this, adjust the pH and shock the fitness system with sanitizer, ensuring you maintain the proper sanitizer level.
M
Miguel WangAug 27, 2025
What to do if my Endless Pools Fitness Equipment has chlorine odor?
- M
  Mindy FloresAug 27, 2025
  A chlorine odor in your Endless Pools Fitness Equipment usually indicates a chloramine level that is too high or a low pH. To fix this, shock the fitness system with sanitizer and adjust the pH to the recommended range.
G
gnelsonAug 30, 2025
How to prevent skin irritation or rash from my Endless Pools E500?
- J
  Jennifer FisherAug 30, 2025
  Skin irritation or rash from your Endless Pools Fitness Equipment can occur due to unsanitary water or a free chlorine level above 5 ppm. To address this, shock the fitness system with sanitizer and maintain the proper sanitizer level. Also, allow the free chlorine level to drop below 5 ppm before using the fitness system.
E
Eric WrightSep 2, 2025
How to remove organic buildup or scum ring around my Endless Pools E500?
- G
  gwilliamsSep 2, 2025
  Organic buildup or a scum ring around your Endless Pools Fitness Equipment is typically due to a build-up of oils and dirt. Wipe off the scum with a clean rag. If the buildup is severe, drain the fitness system, use a fitness system surface and tile cleaner to remove the scum, and then refill the system.
N
Nina GarciaSep 5, 2025
How to get rid of musty odor in my Endless Pools Fitness Equipment?
- T
  Tina GonzalesSep 5, 2025
  A musty odor in your Endless Pools Fitness Equipment is usually caused by bacteria or algae growth. To eliminate it, shock the fitness system with sanitizer. If the problem is visible or persistent, drain, clean, and refill the fitness system.
E
evanwoodsSep 8, 2025
How do I remove stains from my Endless Pools E500 Fitness Equipment?
- S
  Sara PruittSep 8, 2025
  Stains in your Endless Pools Fitness Equipment can be caused by total alkalinity and/or pH being too low, or high iron or copper in the source water. You can adjust the total alkalinity and/or pH to resolve this. Alternatively, use a metal deposit inhibitor.
J
Joel CarterSep 12, 2025
How to remove scale from my Endless Pools E500 Fitness Equipment?
- M
  mccarthyrebeccaSep 12, 2025
  Scale in your Endless Pools Fitness Equipment is often due to high calcium content in the water, with total alkalinity and pH being too high. Adjust the total alkalinity and pH. If scale removal is necessary, drain the fitness system, scrub off the scale, refill the fitness system, and balance the water.