EasyManua.ls Logo

Endless Pools E700 - User Manual

Endless Pools E700
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Fitness Systems
OWNER'S MANUAL 50HZ
by Endless Pools
®

Questions and Answers

  • C
    cookjoannAug 15, 2025
    How to fix cloudy water in my Endless Pools E700?
    • L
      Lindsey SchultzAug 15, 2025
      Cloudy water in your Endless Pools Fitness Equipment can be caused by dirty filters, excessive oils or organic matter, improper sanitization, suspended particles, or old water. To resolve this, try the following: * Clean the filters. * Shock the system with sanitizer. * Add sanitizer. * Adjust the pH and alkalinity to the recommended range. * Run the swim machine and clean the filters again. * If the problem persists, drain and refill the system.
  • S
    Sharon GeorgeAug 18, 2025
    Why does my Endless Pools Fitness Equipment water smell bad?
    • M
      Mr. Shawn Mosley DDSAug 18, 2025
      A bad odor in your Endless Pools Fitness Equipment water is often due to excessive organics, improper sanitization, or low pH. To address this, you can shock the system with sanitizer, add more sanitizer, and adjust the pH to the recommended range.
  • J
    Jake SnyderAug 21, 2025
    What to do if there's algae growth in my Endless Pools E700 Fitness Equipment?
    • C
      Chad TaylorAug 21, 2025
      Algae growth in your Endless Pools Fitness Equipment is often due to high pH or low sanitizer levels. To fix this, shock the system with sanitizer and adjust the pH. Also, shock the system and maintain the proper sanitizer level.
  • M
    Michael BenjaminAug 25, 2025
    How to get rid of chlorine odor in Endless Pools E700?
    • M
      monicagrahamAug 25, 2025
      A strong chlorine odor in your Endless Pools Fitness Equipment is usually caused by a high chloramine level or low pH. To resolve this, shock the system with sanitizer and adjust the pH to the recommended range.
  • M
    Meghan NashAug 27, 2025
    What causes skin irritation from Endless Pools E700 Fitness Equipment?
    • H
      Heather ColeAug 27, 2025
      Skin irritation or rash from your Endless Pools Fitness Equipment can be due to unsanitary water or a free chlorine level above 5 ppm. Shock the system with sanitizer and maintain the proper sanitizer level. Also, allow the free chlorine level to drop below 5 ppm before using the fitness system.
  • T
    tracie59Aug 30, 2025
    Why does Endless Pools Fitness Equipment water irritate my eyes?
    • D
      Dylan FreemanAug 31, 2025
      Eye irritation from your Endless Pools Fitness Equipment water can be caused by low pH or low sanitizer level. Adjust the pH and shock the system with sanitizer, maintaining the proper sanitizer level.
  • B
    brianbarnettSep 2, 2025
    How to remove scale buildup in Endless Pools Fitness Equipment?
    • W
      williamsspencerSep 2, 2025
      Scale buildup in your Endless Pools Fitness Equipment is usually caused by high calcium content in the water, or total alkalinity and pH being too high. Adjust the total alkalinity and pH. If scale removal is necessary, drain the system, scrub off the scale, refill it, and balance the water.
  • J
    Joshua SanchezSep 5, 2025
    How to eliminate a musty odor from my Endless Pools Fitness Equipment?
    • C
      charleslawrenceSep 6, 2025
      A musty odor in your Endless Pools Fitness Equipment is generally due to bacteria or algae growth. Shock the system with sanitizer. If the problem is visible or persistent, drain, clean, and refill the fitness system.
  • S
    shellyguzmanSep 8, 2025
    How to clean organic buildup around my Endless Pools E700 Fitness Equipment?
    • R
      Rose HallSep 8, 2025
      Organic buildup or a scum ring around your Endless Pools Fitness Equipment is caused by a buildup of oils and dirt. Wipe off the scum with a clean rag. If the buildup is severe, drain the fitness system, use a fitness system surface and tile cleaner to remove the scum, and then refill the system.
  • J
    Janet WilsonSep 12, 2025
    What causes stains in my Endless Pools Fitness Equipment and how to remove them?
    • C
      Charles HermanSep 12, 2025
      Stains in your Endless Pools Fitness Equipment can be caused by total alkalinity or pH being too low, or high iron or copper in the source water. Adjust the total alkalinity and/or pH. You can also use a metal deposit inhibitor.

Summary

Welcome

Owners Manual

This manual provides operation and maintenance guidance for the fitness system.

Safety Information

Important Safety Instructions

Essential guidelines for safe operation, handling risks like drowning and electrocution.

Avoiding the Risk to Children

Precautions to prevent child access and ensure supervision for child safety.

Avoiding the Risk of Electrocution

Instructions for safe electrical connections and avoiding shock hazards.

Risks to Avoid

Hazards related to injury, like slipping, loose clothing, and operating alone.

Avoiding the Risk of Hyperthermia

Dangers of prolonged immersion in hot water and symptoms of hyperthermia.

To Reduce the Risk of Injury

Guidelines for safe water temperature and preventing injury.

Important Fitness System Instructions

Key operational guidelines and precautions for system use and maintenance.

Site Requirements

Indoor Considerations

Factors to consider for indoor installation, including ventilation and humidity.

Outdoor Considerations

Factors for outdoor installation, like codes, sunlight, and property lines.

Deck Installation

Considerations for installing the system on a deck, including load capacity.

Delivery Access

Planning for system delivery, including site access and potential obstructions.

E500 Models

Dimensions and specifications for the E500 model fitness systems.

E700 Models

Dimensions and specifications for the E700 model fitness systems.

Electrical Requirements

Single Phase (Model) Wiring

Detailed wiring instructions for 220-240V single-phase systems.

3 Phase (Model) Wiring

Detailed wiring instructions for 380-415V three-phase systems.

Equipment Compartment and Panels

Equipment Compartment

Illustration and identification of components within the equipment compartment.

Door Panel Remove & Replace

Step-by-step instructions for removing and reinstalling access panels.

Getting Started

Main Fitness System Features

Overview of the primary components and controls of the fitness system.

Hydromassage Jets

Explanation of different types of hydromassage jets and their operation.

Swim Machine-Hydraulic

Operation of the swim machine, including remote control and speed adjustment.

Quick Start-Up Instructions

Essential steps before filling, including installation checks and chemical readiness.

Start-Up

Step-by-step guide for filling the fitness system and initial power-up.

Operating Instructions

Main Control Panel

Overview of the main control panel, its display, and user interface.

Settings

How to access and manage system settings like water care and maintenance.

Water Care; Heater Settings

Configuring heater settings and water care modes for optimal performance.

Maintenance

Accessing maintenance reminders, error logs, and standby mode.

Keypad Settings

Customizing display, language, and control panel lock settings.

Wi-Fi (Optional)

Connecting the system to a Wi-Fi network for remote control.

Audio In.Stream 2 (Optional)

Connecting and operating the optional Bluetooth audio system.

Temperature Control

Setting and adjusting the water temperature within the specified range.

Jets Control

Activating and deactivating hydromassage jets and their automatic shut-off.

Light Control

Operating interior and exterior lights, including color sequences.

Smart Winter Mode

How the system prevents freezing during cold weather.

Water Quality and Maintenance

Basic Information

Importance of water maintenance and basic testing procedures.

Water Quality Chart

Recommended target and range values for key water parameters.

Chemical Safety

Guidelines for safe handling and storage of water treatment chemicals.

How to Add Chemicals to the Water

Detailed steps for administering chemicals and important notes.

Performing Super Chlorination;Non-Chlorine Shock Treatment

Procedures for shock treatment to maintain water sanitation.

Manual Chlorine (Sodium Dichlor)

Guidelines for using sodium dichlor for effective water sanitization.

Vacation Water Care Instructions

Steps for maintaining water quality during short periods of non-use.

Long Time Periods (5-14 Days)

Procedures for water care when away for extended periods.

Supplemental Water Maintenance

Optional water additives like Mineral Deposit Inhibitors and Foam Inhibitors.

Glossary

Definitions of common chemical and water quality terms used in the manual.

Care and Maintenance

Filter Maintenance

Importance of regular filter cleaning for optimal system performance.

Filter Cartridge Removal and Cleaning Instructions

Step-by-step guide for cleaning or replacing filter cartridges.

Draining Your Fitness System

Instructions for safely draining the fitness system water.

Prevention of Freezing

Measures to prevent freezing in cold climates and maintain energy efficiency.

Winterizing Your Fitness System

Special considerations for winter use or storage to prevent damage.

Service Information

General Information

General advice for troubleshooting and contacting service personnel.

GFCI and High Limit Thermostat

Troubleshooting GFCI trips and high-limit thermostat issues.

Acts Invalidating Warranty

Actions that will void the product warranty, including misuse and improper installation.

General Operation Troubleshooting Guide

Common operational problems and their solutions.

Troubleshooting Error Codes

Interpretation of error codes and recommended actions.

Fitness System Specifications

Endless Pools E700 Specifications

General IconGeneral
ModelE700
CategoryFitness Equipment
Length168″ (427 cm)
Height4'
Installation TypeAbove Ground

Related product manuals