Endress+Hauser Levelflex FMP56 - Page 51

Levelflex FMP56, FMP57
Endress+Hauser 51
Installation from the side
Ø16
(Ø0.63)
Ø16.5(0.65)
Ø<26
(Ø<1.02)
mm(in)
A0014140
• If installation from above is not possible, the Levelflex can also be mounted from the side.
• In this case, always fix the rope probe →  48 .
• Support rod probe if the lateral loadbearing capacity is exceeded →  43. Only fix rod probes at
the probe end →  48.