Endress+Hauser Levelflex FMP56 - Page 138

Operating menu Levelflex FMP56, FMP57 FOUNDATION Fieldbus
138 Endress+Hauser
Factory setting Depending on the probe
Additional information
E
0%
A0013180
 34 Empty calibration (E) for level measurements in bulk solids.
Full calibration 
Navigation  Setup → Full calibr.
Description Specify the distance F between the minimum level (0%) and the maximum level (100%).
User entry Depending on the probe
Factory setting Depending on the probe
Additional information
F
0%
100%
A0013191
 35 Full calibration (F) for level measurements in bulk solids