Endress+Hauser Levelflex FMP56 - Setup Menu

Levelflex FMP56, FMP57 FOUNDATION Fieldbus Operating menu
Endress+Hauser 137
17.3 "Setup" menu
• : Marks the navigation path to the parameter via the display and operating
module.
• : Marks the navigation path to the parameter via an operating tool (e.g.
FieldCare).
• : Marks parameters which can be locked via the software locking →  58.
Navigation  Setup
Distance unit 
Navigation  Setup → Distance unit
Description Select distance unit.
Selection SI units
• mm
• m
US units
• ft
• in
Factory setting m
Bin type 
Navigation  Setup → Bin type
Prerequisite Medium type (→  148) = Solid
Description Specify bin type.
Selection • Concrete
• Plastic wood
• Metallic
• Aluminium
Factory setting Metallic
Empty calibration 
Navigation  Setup → Empty calibr.
Description Specify the distance E between the process connection and the minimum level (0%). This
defines the starting point of the measuring range.
User entry Depending on the probe