Endress+Hauser Liquiphant FTL64 - Incoming Acceptance and Product Identification; Receiving and Inspecting the Device

Mounting Liquiphant FTL64
10 Endress+Hauser
5.1.4 Take clearance into consideration
A0042340
 6 Take clearance outside the tank into consideration
5.1.5 Support the device
NOTICE
If the device is supported incorrectly, shocks and vibrations can damage the coated
surface.
‣
Only use suitable supports.
Support the device in the event of severe dynamic load. Maximum lateral loading capacity of
the pipe extensions and sensors: 75 Nm (55 lbf ft).