Commissioning Liquistation CSF34
54 Endress+Hauser
7.3.2 Display behavior
Menu/Operation/Display
Function Options Info
Contrast 5 to 95 %
Factory setting
50 %
Adjust the screen settings to suit your working
environment.
Backlight = Automatic
The backlighting is switched off automatically
after a short time if a button is not pressed. It
switches back on again as soon as you press the
navigator button.
Backlight = On
The backlighting does not switch off
automatically.
Backlight Selection
• On
• Off
• Automatic
Factory setting
Automatic
Screen rotation Selection
• Manual
• Automatic
Factory setting
Manual
If Automatic is selected, the single‐channel
measured value display switches from one
channel to the next every second.
Current program: Read only The name of the sampling program currently
selected is displayed.
Status Read only Active
The sampling program has been started and
the device takes a sample as per the set
parameters.
Inactive
No sampling program has been started, or a
program that was running has been stopped.
Start Action The selected sampling program is started.
Measurement Current measured values at the inputs are
displayed. Analog and binary inputs cannot be
modified here.
Show summary of current
program
The bottle statistics for the sampler are
displayed. The statistics appear for each
individual bottle after the start of the program.
You can find more information in the Chap.
"Bottle statistics".
Show summary of inputs The configured counters of the analog and
binary input are displayed.
Max. 8 lines
To Next Page
Loading...
