Endress+Hauser Micropilot FMR50 - Page 57

Micropilot FMR50
Endress+Hauser 57
FMR50 with slip-on flange 6"/DN150
ø240 (9.45)
ø241.3 (9.5)
ø285 (11.2)
8 x
24 (0.94)
ø240.7 (9.48)
ø285 (11.2)
R
A
B
142 (5.59)
130 (5.12)
20 (0.79)
35.5 (1.4)
20 (0.79)
ø143 (5.63)
ø163 (6.42)
30.5 (1.2)
8 x
23 (0.91)
A0023380
 34 Dimensions of FMR50 with slip-on flange 6"/DN150. Unit of measurement mm (in)
A Horn antenna 100mm/4"
B Horn antenna 80mm/3"
R Reference point of measurement
A: Valid for horn 100mm/4", PP cladded
Process connection:
UNI slip-on flange 6"/DN150, PP - suitable for flange:
• ASME: NPS 6" Cl.150
• EN: DN150 PN16
• JIS: 10K 150
B: Valid for horn 80mm/3", PP cladded
Process connection:
UNI slip-on flange 6"/DN150, PP - suitable for flange:
• ASME: NPS 6" Cl.150
• EN: DN150 PN16
• JIS: 10K 150
Weight
Housing
Component part Weight
GT19 housing - plastic Approx.
1.2 kg (2.7 lb)
GT20 housing - aluminum Approx.
1.9 kg (4.2 lb)
Antenna and process connection
Device Weight of antenna/process connection
FMR50 Max. 1.5 kg (3.3 lb) + flange weight
1)
1) For the flange weight, see Technical Information TI00426F.