Endress+Hauser Micropilot FMR50 - 3 Product Description; Product Design; 4 Incoming Acceptance and Product Identification; Incoming Acceptance

Micropilot FMR50 HART Product description
Endress+Hauser 11
3 Product description
3.1 Product design
3.1.1 Micropilot FMR50
1 1 6
1
2 4 4
3 5
A0016784
 1 Design of the Micropilot FMR50 (26 GHz)
1 Electronics housing
2 Process connection (Thread)
3 Horn antenna 40 mm (1-1/2 in), PVDF encapsulated
4 Horn antenna 80mm/100 mm (3in/4 in), PP cladded
5 Slip-on flange
6 Mounting bracket
4 Incoming acceptance and product identification
4.1 Incoming acceptance
Upon receipt of the goods check the following:
• Are the order codes on the delivery note and the product sticker identical?
• Are the goods undamaged?
• Do the nameplate data match the ordering information on the delivery note?
• Is the DVD with the operating tool present?
If required (see nameplate): Are the Safety Instructions (XA) present?
If one of these conditions is not satisfied, contact your Endress+Hauser Sales Center.