Endress+Hauser Micropilot FMR51 - Page 72

Micropilot FMR51, FMR52
72 Endress+Hauser
FMR52 with flange
R
A
B
øb
øb
øc
øc
28.6 (1.13)
13.8 (0.54)
4 (0.16)
a
a
4 (0.16)
94(3.7)
121(4.76)
ø48 (1.89)
ø75 (2.95)
A0023389
 29 Dimensions FMR52 with flange; dimensions: mm (in)
A Antenna: Horn 50mm/2"
B Antenna: Horn 80mm/3"
R Reference point of the measurement
Flanges according to EN1092-1 (suitable for DIN2527)
Antenna
1)
BO: Horn 50mm/2" BP: Horn 80mm/3"
Process connection
2)
CFK: Flange DN50 CGK: Flange DN80 CHK: Flange DN100 CJK: Flange DN150
a 20 mm (0.79 in) 20 mm (0.79 in) 20 mm (0.79 in) 22 mm (0.87 in)
b 102 mm (4.02 in) 138 mm (5.43 in) 158 mm (6.22 in) 212 mm (8.35 in)
c 165 mm (6.5 in) 200 mm (7.87 in) 220 mm (8.66 in) 285 mm (11.2 in)
1) Feature 70 of the product structure
2) Feature 100 of the product structure
Flanges according to ANSI B16.5
Antenna
1)
BO: Horn 50mm/2" BP: Horn 80mm/3"
Process connection
2)
FK: Flange 2" AGK: Flange 3" AHK: Flange 4" AJK: Flange 6"
a 17.5 mm (0.69 in) 22.3 mm (0.88 in) 22.3 mm (0.88 in) 23.9 mm (0.94 in)
b 92 mm (3.62 in) 127 mm (5 in) 158 mm (6.22 in) 212 mm (8.35 in)
c 150 mm (6 in) 190 mm (7.5 in) 230 mm (9 in) 280 mm (11 in)
1) Feature 70 of the product structure
2) Feature 100 of the product structure
Flanges according to JIS B2220
Antenna
1)
BO: Horn 50mm/2" BP: Horn 80mm/3"
Process
connection
2)
KFK: Flange 10K
50A
KGK: Flange 10K
80A
KHK: Flange 10K
100A
KJK: Flange 10K
150A
a 16 mm (0.63 in) 18 mm (0.71 in) 18 mm (0.71 in) 22 mm (0.87 in)
b 96 mm (3.78 in) 127 mm (5 in) 151 mm (5.94 in) 212 mm (8.35 in)
c 155 mm (6.1 in) 185 mm (7.28 in) 210 mm (8.27 in) 280 mm (11 in)
1) Feature 70 of the product structure
2) Feature 100 of the product structure