Micropilot FMR51, FMR52 FOUNDATION Fieldbus Accessories
Endress+Hauser 111
16.1.4 Horn protection for horn antenna with variable antenna
extension
This section is valid for the following options of ordering feature 610 "Accdessory
Mounted".
• OU: ...mm antenna extension
• OV: ... inch antenna extension
For any other device version:
Accessory Description
Horn protection for
80 mm (3 in) or
100 mm (4 in) horn
antenna
A0027190
A Antenna extension (not supplied with the horn protection)
B Horn antenna of the Micropilot (not supplied with the horn protection)
C Horn protection
⌀d Diameter of horn protection (see table below)
⌀D Minimum nozzle diameter (see table below)
L Length of antenna with horn protection (see table below)
Horn protection for FMR51 with variable antenna extension
Antenna
1)
Order code horn
protection
Dimensions antenna + horn protection
L Ød ØD
BC: Horn 80mm/3" 71105890 203 mm (8 in) 96 mm (3.78 in) ≥ DN100
BD: Horn 100mm/4" 71105889 267 mm (10.5 in) 116 mm (4.57 in) ≥ DN150
1) Feature 070 of the product structure