Endress+Hauser Oxymax COS22 Series - Page 12

Installation Oxymax COS22
12 Endress+Hauser
measured error with trace measurements, pay particular attention to complete ventilation
of the assembly.
A0005720
 4 Flow assembly CPA240 with protective cover
1
7
6
5
3
2
4
A0005721
 5 Bypass installation
1 Main pipe
2 Medium removal
3, 6 Manually actuated or solenoid valves
4 Sampling
5 Flow assembly with installed sensor
7 Medium return
Flow assembly for water treatment and processes
The compact stainless steel assembly offers space for a 12-mm sensor with a length of
120 mm. The assembly has a low sampling volume and, with the 6-mm connections, it is
best suited for residual oxygen measurement in water treatments and boiler feedwater.
The flow comes from below.
1 2
3
4
A0014081
 6 Flow assembly
1 Built-in sensor
2 Drain
3 Wall mount (clamp D29)
4 Inflow