Endress+Hauser PHX20 - Commissioning; Configuring Menu Items; Setting Decimal Point

14
5 Commissioning
Configuring the
menu items
To configure the menu item, loosen the 4 Phillips screws (C) on the
display and remove the cover.
Fig. 2: A, B: keys C: Phillips screws
A ➔ Downwards and menu item selection
B ➔ Upwards and menu item selection
A+B ➔ Select menu item to configure or acknowledge the
setting
Decimal point Press the B key until | d | P | | | is displayed.
➔ A+B menu item for setting: | - | - | -.| - |
➔ B or A for up and down: | - | -.| - | - |
➔ A+B acknowledge the setting and return to menu item "dP"
A
B
C
P01-PHX2xxxx-19-xx-xx-xx-001
en