Operation and commissioning Process Display
34
5 Operation and commissioning
5.1 Quick operation guide
Detailed information on operating and configuring the device, as well as instructions and a
description of the individual functionalities, can be found in the Operating Instructions. An
overview of all the operating parameters is provided in Section 5.1 of the Operating Instructions.
5.2 Display and operating elements
G09-RIA452xx-19-00-06-xx-000
Fig. 8: Display and operating elements
1) Green operating indicator, lights up when supply voltage is applied
2) Red fault indicator, flashes in event of sensor or device error
3) Limit value display: if power is supplied to a relay, the symbol is displayed.
4) Digital input status: green indicates ready for operation, yellow indicates a signal is present
5) Bar graph yellow, 42-section with orange/red range overshoot and undershoot
6) 7-digit 14-segment display in white for measured values
7) 9x77 DOT matrix in white for text, units and menu icons
8) Key or lock symbol indicates whether device operation is locked (see Section 5.3.3)
9) Jog/shuttle dial for local device operation
5.2.1 Display
Remove the protective strip from the display as this restricts display legibility
otherwise.
Range Display Relay Analog output Integration
Input current is
below the lower
error limit
Display " " Fault condition Set failsafe mode No integration
To Next Page
Loading...
