Tankvision configuration
35
Initial calibration and system modifications
Initial calibration and changes to the Tankvision Tank Scanner NXA820
Units
The units do not have to be configured if "Use Global Configuration Store" (Section ) is selected. The
units can be checked under "System ➝ Tank Scanner Unit ➝ Customer Settings ➝ Units". This
view allows the user to choose between the unit schemes.
Selecting the Unit
The exact settings of the unit scheme selected can be checked under "Advanced"..
Checking the Units
!
Note!
• An apostrophe may not be chosen as the thousand separator for W&M applications.
• If the Tankvision device retrieves the basic settings from another Tankvision device (Global
Configuration Store), the units of this Tankvision device do not have to be checked. The name of
the box (Subscription Store) that provides the basic settings can be found under "System ➝ Global
Settings ➝ Customer Settings ➝ Define Configuration Store Details" (Fig. Configuration Store
Details).
Configuration Store Details
To Next Page
Loading...
