Endress+Hauser Tankvision NXA820 - Field Device Assignment

Tankvision configuration
36
Field device assignment
The field device assignment must be checked under "System ➝ Tank Scanner Unit ➝ Field Scan ➝
Manage Field Scan Configuration-Modbus EIA485".
The following parameters have to be checked for Modbus EIA485:
•Baud rate
•Parity
• Gauge slave address: assignment to the tank ID / tank name
• Gauge type: assignment to the tank ID / tank name
• Modbus register map: assignment to the field device type (gauge type)
Field Scan Configuration - Modbus