TI00461C/07/EN/14.12
71159923
Technical Information
Turbimax CUS51D
Sensor for turbidity and solids content
Installation and immersion sensor for low, middle and high turbidity and
solids concentrations
Application
Turbimax CUS51D is a sensor for all applications of wastewater
treatment.
• Turbidity measurement in the outlet
• Suspended solids in the activated sludge basin and in the
recirculation
• Suspended solids in the sludge treatment
• Filterable solids in the outlet
Your benefits
• All sensor principles (90°, 135° and four-beam pulsed light)
are included in the sensor head and allow optimal adaption to
the measurement task.
• The sensor is factory-calibrated (basis formazine). All
selectable applications (e.g. activated sludge) are precalibrated
and allow quick and easy commissioning.
• Standardized communication (Memosens technology) allows
"plug and play".
• Intelligent sensor - all characteristics and calibration values
are stored in the sensor.
• Calibrations provided by the customer with up to 5 points -
realizable in lab or on site.
To Next Page
Need help?
General
