Endress+Hauser Turbimax CUS51D - Certificates and Approvals; Ordering Information

Turbimax CUS51D
Endress+Hauser 13
Certificates and approvals
EMC compatability Interference emission and interference immunity complies with EN 61326: 2005, Namur NE 21:2007
Ordering information
Order code To get to the product page enter the following address into your browser:
www.products.endress.com/cus51d
1. You can choose from the following options on the product page located on the right:
2. Click "Configure this product".
3. The configurator opens in a separate window. You can now configure your device and receive the
complete order code that applies for the device.
4. Afterwards, export the order code as a PDF or Excel file. To do so, click the appropriate button at the top
of the page.
Product structure The following product structure represents the status of printing. You can create a complete and valid
order code on the Internet using the configurator tool.
Note!
To complete your order code, simply add the accessories code to the end of order code. If you have any
questions, please contact your local sales office.
Scope of delivery The scope of delivery comprises:
• 1 sensor Turbimax CUS51D in the ordered version
• 1 Operating Instructions BA461C/07/en
Approval
AA Non-harzadous area
Application, measuring range
C1 Process water
D1 Process water; solids
Adaption cable
A Fixed cable, crimp sleeves
B Fixed cable, M12-plug
Cable length
2 3 m (9.9 ft)
3 7 m (23 ft)
4 15 m (49.2 ft)
CUS51D- order code
Accessories code Accessories mounted
IA Air cleaning, 6/8 mm
IB Air cleaning, 6.35 mm (1/4")