Endress+Hauser Turbimax CUS51D - Page 14

Turbimax CUS51D
14 Endress+Hauser
Accessories
Assemblies Retractable assembly Cleanfit CUA451
• Retractable assembly with ball valve; for turbidity sensors; material: stainless steel
• Ordering per product structure (--> Online configurator, www.products.endress.com/cua451)
• Technical Information TI00369C/07/EN
Wastewater assembly Flexdip CYA112
• Modular assembly system for sensors in open basins, channels and tanks
• Versions in stainless steel or PVC
• Ordering per product structure (--> Online configurator, www.products.endress.com/cya112)
• Technical Information TI00432C/07/EN
Flow assembly Flowfit CUA250
• For CUS31/CUS41/CUS51D
• Ordering per product structure (--> Online configurator, www.products.endress.com/cua250)
• Technical Information TI00096C/07/EN
Flow assembly Flowfit CYA251
• Connection: see product structure
• Material: PVC-U
• Order as per product structure
Holder system Holder system Flexdip CYH112 for water and wastewater assembly Flexdip CYA112
• Modular holder system for sensors and assemblies in open basins, channels and tanks
• The holder system CYH112 works for nearly any type of fixing - fixing on the floor, wall or directly on a rail.
• Material: stainless steel
• Ordering per product structure (--> Online configurator, www.products.endress.com/cya112)
• Technical Information TI430C/07/EN
Cleaning system Cleaning system with pressurized air
• Connection: 6/8 mm or 6.35 mm (¼")
• Materials: POM/V4A
• 6/8 mm order number: 71110782
• 6.35 mm (¼") order number: 71110783
a0013261
Cleaning system
AVersion 6 mm
B Version 6.35 mm (¼")
Compressor
• For cleaning system
• 230 V AC order number: 71072583
• 115 V AC order number: 71096199
Ø 40.1
(1.58)
Ø 50 (1.97)
72 (2.83)
77.3 (3.04)
17.8
(0.70)
11.5
(0.45)
65.8 (2.59)
17.8
(0.70)
mm (inch)
48 (1.89)
A
B