Endress+Hauser VU113 - Page 12

Commissioning with Bluetooth VU113 Graphical display with keys and Bluetooth VU112 Graphical display with keys
12 Endress+Hauser
• Temperature range: –40 to +85 °C (–40 to +185 °F)
• Suitable for wet environments, integrated in measuring devices
• Relative humidity: operation up to 100 % in the measuring devices
Do not open in a condensing environment!
L
WARNING
Pay attention to restrictions for operation in explosive atmospheres.
‣
Observe the Safety Datasheet for the device.
4.3.1 Operating altitude
As per IEC 61010-1 Ed.3:
• Up to 3 000 m (9 800 ft) above sea level
• Can be extended to 5 000 m (16 400 ft) above sea level if overvoltage protection (OVP) is
used, for details see the TI of the device
5 Commissioning with Bluetooth
5.1 Requirements
Device requirements
Commissioning via SmartBlue is only possible if the VU113 (graphical display with
Bluetooth®) is installed.
System requirements
SmartBlue is available as a download from the Google Play Store for Android devices and from
the iTunes Store for iOS devices
• iOS devices: iPhone 5S or higher from iOS11; iPad 5th Generation or higher from iOS11;
iPod Touch 6th Generation or higher from iOS11
• Devices with Android: from Android 6.0 and Bluetooth® 4.0
Initial password
• The serial number of the device (on the nameplate) serves as the initial password when the
connection is established for the first time.
• If the main electronics module of the device is a spare part, the initial password is the ID
number of the Bluetooth display.
The ID number is located on the rear of the display beside the Bluetooth logo.
Please note the following:
If the Bluetooth display is removed from one device and installed in another device.
• All the log-in data are only saved in the Bluetooth display and not in the device
• The password changed by the user is also saved in the Bluetooth display
• The Bluetooth and/or background lighting function can depend on the supply voltage
to the device. For details on the supply voltage range, see the Operating Instructions
for the entire device.