10
software version, unit serial number, battery voltage and selected
fuel. The third screen displays the ambient temperature, units of
temperature, emission units, and selected oxygen reference.
PRINT
Sends data to the printer.
The buttons of the last row are used to customize the analyzer and execute all
changes in stored parameters, such as time, fuel, calibration data, etc.
SHIFT
Displays the Setup Menu.
▲
Increments the entry marked by the cursor to the next higher entry.
(This may be a digit or another parameter).
▼
Decrements the entry marked by the cursor to the next lower entry.
(This may be a digit or another parameter).
ENTER
Executes and stores all the changes.
To Next Page
Loading...