EasyManua.ls Logo

Energic Plus LF5 - Page 13

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13/44
Do not touch battery terminals while the equipment is in operation.
Keep internal parts clean and dry. Dirt and/or moisture can cause insulation failure.
This failure can result in high voltage at the charger output.
The battery produces very high currents when short-circuited and any metal conductor
that is carrying this current will burn the skin severely if they come into contact.
Make sure that any kind of jewellery does not come into contact with the battery terminals
or the cell connectors on top of the battery.
Ensure that the operator or user is not wearing any conductive materials.
The cables must never be tensioned. Make sure there is always a little slack.
Battery acid is very corrosive. The operator or persons using the discharger and/or battery
must always wear protective gloves and eye protection.
We strongly recommend to wear rubber aprons and face protection as well.
The ventilation system in the room where the batteries are stored should be designed to
provide an adequate amount of fresh air for the number of batteries being charged.
Do not place tools or anything metallic on top of any battery.
Make sure the charger is turned OFF before connecting or disconnecting the battery.
The digital display must be completely OFF.
Do not open the cabinet. Only qualified personnel can open this.

Related product manuals