EnerSys IMPAQ EI3-IN-4C User Manual

IMPAQ™
Owner’s Manual
AM-IMPAQ-OM
Rev AB October 2018
15
Memorization Data
Memo
Description
Memo
Description
Profile
Selected profile
Chg Time
Time of the charge
cycle (minutes)
Capacity
Rated battery capacity
(AH)
AH
Amp-hours returned
during charge cycle
U batt
Rated battery voltage (V)
SoC
Start of charge date
and time
Temp
Battery temperature at
start of charge (F)
DBa
Battery disconnect date
and time
% init
State of charge at start of
charge (%)
Status
Partial or complete
U start
Battery voltage at start of
charge (Vpc)
Fault
Fault Codes
U end
Battery voltage at end of
charge (Vpc)
CFC
Termination code (for
service tech)
I end
Current at end
of charge
STATUS
This menu displays the status of the charger’s internal counters (number of normal and partial
charges, faults by type, etc.).
Status Screen
Status
Description
Charge
Total number of charges – corresponds to the total of normally
terminated charges and charges terminated with or by faults
Number of charges normally terminated
Number of charges abnormally terminated
DF1 etc.
Number of faults recorded by the charger (see Fault Codes)
TH
Number of charger temperature faults

EnerSys IMPAQ EI3-IN-4C Specifications

General

Brand	EnerSys
Model	IMPAQ EI3-IN-4C
Category	Battery Charger
Language	English