CAUTION: There are dangerous voltages within the battery charger cabinet. Only qualified
personnel should attempt to adjust or service this battery charger.
The charger requires a minimum of maintenance. Connections and terminals should be kept
clean and tight. The unit (especially the heatsink) should be periodically cleaned with an air
hose to prevent any excessive dirt build up on components. Care should be taken not to bump
or move any adjustments during cleaning. Make sure that both the AC lines and the battery are
disconnected before cleaning. The frequency of this type of maintenance depends on the
environment in which this unit is installed.
For service, contact your sales representative or call:
1-800-ENERSYS (USA)
1-800-363-7797
To Next Page
Loading...
Need help?
General
