EnerSys NexSys+ TC3 IQ - Features; Technical Information

44
FEATURES
Features
• Microprocessor-controlled.
• Able to auto-identify battery’s capacity.
• Able to adapt to State of Charge (SoC).
• Compatible with battery voltages of:
•
1ph 3ph
12V
24V 24/36/48V
36/48V 72/80V
96V
120V
Wireless integration with Wi-iQ
®
battery
monitoring devices.
• Individual battery pack recognition and automatic
pairing with the charger.
• Unique prole for charging Thin Plate Pure Lead
(TPPL).
• Unique charging proles for the following
NexSys
®
batteries: NXBLOC; NXSTND; NXSFAST;
NXP2V; NXPBLC; ATP2V.
• Remote access via E Connect™ mobile app to
change settings, monitor charger and share data.
• Controller Area Network (CAN) communication
capable.
• Fully programmable to unique eet
requirements.
• Battery chemistry agnostic: EnerSys
®
Lithium-ion (Li-ion), TPPL, Flooded and Gel
Lead-Acid batteries.
Item Description
Serial
Number
Provides date code.
Hertz
Input voltage frequency. Under
no conditions operate the charger
at a different frequency or from a
generator with unstable frequency.
Phase
TCX. When “1” indicates a Single
Phase Charger and “3” indicates a
Three Phase Charger.
AC Volts
Nominal voltage for which this charger
is rated to operate.
DC Volts
Nominal DC output voltage of the
charger.
Modules
Actual number of power modules
installed in the charger cabinet.
DC Amps
DC current that this charger will deliver
to a discharged battery with the
number of power modules installed
and based on the nominal voltage.
Technical Information
Name Plate Label Denitions