To Next PageTo Next Page
Need help?Do you have a question about the EnerSys NexSys+ NIP1 and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Efficiency | >90% |
| Cooling Method | Fan cooled |
| Storage Temperature | -40°C to 70°C |
| Chemistry | Lead |
| Protection Features | Over voltage, Over current, Over temperature, Reverse polarity, Short circuit |
| Communication Interface | CAN bus |
| Operating Temperature | -20°C to 50°C |
| Dimensions | Varies by model |
| Weight | Varies by model |
Covers general safety advice, handling, and environmental conditions for charger operation.
Explains the structure of part numbers and UL model numbers for charger identification.
Details letter codes for output power, cabinet size, voltage, AC line, and charge profiles.
Describes serial number, battery type, capacities, AC/DC specs, and certifications (CEC, cULus).
Guidelines for charger placement, environmental considerations, and physical installation.
Instructions for connecting input power and ensuring proper grounding of the charger unit.
Details branch circuit protection requirements and provides a chart for breaker/fuse sizing.
Explains terms like Wi-iQ, Charging Profile, TPPL, Gel-Bloc, IONIC, NXBLOC, NXSTND, NXFAST, VRLA.
Defines Equalization Charging, Block Out Time, and Refresh Charging operations.
Describes microprocessor control, battery compatibility, and charging adaptation.
Explains starting a charge, charging current behavior, and AC power failure handling.
Details requirements for charging multiple batteries in series.
Lists and defines common terms used throughout the manual.
Lists compatible battery voltages and available charging profiles.
Explains the function and benefits of the Wi-iQ device for battery monitoring.
Identifies and describes the buttons and LED indicators on the control panel.
Explains how to access and navigate the main menu and its functions.
Describes how to display and view details of past charge cycles.
Lists and defines the data recorded for each charge cycle.
Explains how to view charger status counters and fault types.
Details how to display and interpret charger configuration settings.
Accessing USB for software updates and managing charger software.
Adjusting date, time, language, region, and display settings.
Customizing display appearance and configuring screen saver settings.
Configuring daylight saving time and password entry for service menus.
Shows information when the charger is ready but not connected to a battery.
Covers starting, delayed start, and countdown displays for charging.
Explains how Wi-iQ device integration affects the charging process.
Describes the display and LEDs upon charge completion.
Details manual and automatic equalization start procedures.
Explains how faults are displayed and lists common fault codes, causes, and solutions.
Provides guidance on cleaning, safety precautions, and contacting service.
Provides detailed dimensions for mounting 1 kW 3-bay and 6-bay cabinets.
Provides detailed dimensions for 3.5 kW 2, 4, 6, and 8-bay cabinets.
Detailed table of AC input and DC output specifications for 1 kW models.
Detailed table of AC input and DC output specifications for 3.5 kW models.
A log for recording changes made to factory settings.
A log for recording performed service tasks and dates.
