EasyManuals Logo

EnerSys NexSys+ NIP1 User Manual

EnerSys NexSys+ NIP1
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
NexSys
®
+
Owner’s Manual
AM-NXSPLUS-OM
Rev AC October 2018
6
Specialty Charger Options List
Suffix
Description
C6
6 Ft of AC Cord
C10
10 Ft of AC Cord
C12
12 Ft of AC Cord
C18
18 Ft of AC cord
L10
10 Ft of DC cable
L13
13 Ft of DC cable
L15
15 Ft of DC cable
L18
18 Ft of DC cable
L20
20 Ft of DC cable
L25
25 Ft of DC cable
L30
30 Ft of DC cable
PLC
PLC
R
Remote ready
IR
Remote Installed
Serial Number
This is the serial number that indicates complete information about the charger. It must be
supplied with the part number on any correspondence or discussion regarding this charger.
Battery Type
The chemical content construction of the battery this unit is designed to charge is given in this
part of the nameplate. (L-A = Lead Acid)
Max AH
This is the maximum amp-hours capacity of this cabinet.
No. Cells
This is the number of battery cells this unit will charge. This number must match exactly with
any battery connected to the charger output.
Max Modules
This is the maximum number of modules the cabinet can hold.
Hertz
This gives the frequency in cycles per second of the AC input voltage. Under no conditions
operate the charger at a different frequency or from a generator with unstable frequency.
Phase
Number "3" indicates a Three Phase Charger and “1” indicates a Single Phase Charger.
AC Volts
This is the nominal voltage for which this charger is rated. The charger will only operate on this
voltage.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EnerSys NexSys+ NIP1 and is the answer not in the manual?

EnerSys NexSys+ NIP1 Specifications

General IconGeneral
BrandEnerSys
ModelNexSys+ NIP1
CategoryBattery Charger
LanguageEnglish

Related product manuals