To Next PageTo Next Page
Need help?Do you have a question about the EnerSys PowerSafe SBS Series and is the answer not in the manual?
General| Brand | EnerSys |
|---|---|
| Model | PowerSafe SBS Series |
| Category | Camera Accessories |
| Language | English |
Check delivered items for damage/shortages against Bill of Lading; report to carrier. EnerSys not responsible for unreported damage.
Check contents for damage/shortages against packing slip; inform EnerSys immediately. EnerSys not responsible for damage after storage.
Store in a clean, cool, dry area. Self-discharge reduces charge over time, accelerated by high temperatures.
Charge batteries to 2.27Vpc with limited current (10A/100Ah) for 24-48 hrs when OCV approaches 2.10Vpc or max storage time is reached.
Details hydrogen evolution rates per block type at a float charge of 2.27 Vpc, crucial for safety.
Follow layout, position batteries, clean terminals, apply NO-OX if needed, and install connectors with specified torque.
Use constant voltage chargers; maintain float voltage within recommended ranges and apply temperature compensation.
Measure string voltage, temperature, float current, and resistances. Adjust float voltage and inspect for corrosion.
Batteries are recyclable. Scrap batteries must be packaged, transported, and disposed of according to regulations by licensed recyclers.
Approved as non-hazardous for transport. Follow US DOT and ICAO/IATA regulations for packaging and details.
