EnGenius ECB600 - Page 4

ECB600
Dual Band Long Range Multi-Function Access Point/ Client Bridge
2.4GHz+5GHz 300Mbps+300Mbps 29dBm AP/CB/WDS/Repeater
Dimension
189mm x 140mm x 26mm
Physical Interface
LAN: 1 x 10/100/1000 Gigabit Ethernet (802.3at PoE standard supported)
Reset
Power Jack
Power on/off switch
LED Definition
Power x1
Orange
Booting: Blink at 1HBooting
System Ready: On
Firmware Upgrade: Blink at 4Hz
System Off: Power Off
LAN x1
Blue
Link: Solid Light / Active: Blinking
(Receiving/ Transmitting data)
WLAN x2
2.4G Blue
5G Blue
Link: Solid Light / Active: Blinking
(Receiving/ Transmitting data)
Adapter
12V / 2A
Wireless Specifications
Frequency Band
Radio I: 11b/g/n : 2.412～2.484 GHz
Radio II: 11a/n :5.18 ~ 5.24 & 5.26 ~ 5.32 & 5.5 ~ 5.7 & 5.745 ~ 5.825 GHz
Modulation
Technology
OFDM: BPSK, QPSK, 16-QAM, 64-QAM
DBPSK, DQPSK, CCK
Operating Channels
2.4G (11 for North America, 14 for Japan, 13 for Europe)
5G (TBD)depend on what region
Wireless Setting
Operation Mode – AP / CB/ WDS / Repeater
Wireless Mode – 11a/ 11b/ 11g /11n
Channel Selection (Setting varies by Country)
Channel Bandwidth (Auto, 20Mhz, 40Mhz)
Transmission Rate –
2.4GHz: 11n only ,11b/g/n mix ,11b only ,11b/g, 11g only
5GHz: 11n only mode, 11a/n mix mode, 11a only mode