EnGenius ECB1200 - User Manual

Table of Contents
1

Summary

Introduction

Features and Benefits

Details the product's key features and advantages.

Before you Begin

Computer Settings (Windows)

Steps to configure TCP/IPv4 settings on Windows systems.

Computer Settings (Mac OS X)

Steps to configure TCP/IPv4 settings on Mac OS X systems.

Hardware Installation

Instructions for physically connecting and setting up the device.

Configuring Your ECB1200

Default Settings

Provides default IP, username, and password for initial access.

Web Configuration

Guide to accessing and using the web-based configuration interface.

Building a Wireless Network

Access Point Mode

Client Bridge Mode

WDS AP; WDS Station Mode

WDS Bridge Mode

Network

Basic

Allows modification of the device's IP settings (IPv4/IPv6).

Spanning Tree Protocol

Wireless

Wireless Setting

Wireless Network

Displays and configures wireless network parameters.

Wireless Security

Options for configuring WEP, WPA, WPA2, and Enterprise security.

Guest Network Settings

Wireless MAC Filtering

WDS Link Settings

Management

Administration

Manages administrator username and password settings.

Management VLAN Settings

Wireless Traffic Shaping

Backup;Restore

Firmware Upgrade

Process for updating the device's firmware.

Time Settings

WiFi Scheduler

EnGenius ECB1200 Specifications

General

Frequency Bands	2.4 GHz, 5 GHz
Maximum Data Rate	1200 Mbps
Power over Ethernet (PoE)	Yes
Antenna Type	Internal
Mounting Options	Wall, Ceiling
Maximum Data Rate (5 GHz)	867 Mbps
Maximum Data Rate (2.4 GHz)	300 Mbps
Ethernet Ports Count	1
Antenna Gain (2.4 GHz)	3 dBi
Antenna Gain (5 GHz)	5 dBi
PoE Standard	802.3af
Wireless Speed	1200 Mbps
Antennas Count	2
Maximum Transmit Power (2.4 GHz)	23 dBm
Maximum Transmit Power (5 GHz)	23 dBm
Operating Modes	Access Point, WDS
Security	WPA, WPA2, WEP
Operating Humidity	10% to 90% (non-condensing)