Need help?Do you have a question about the EnGenius ECB300 and is the answer not in the manual?
General| 5 GHz | No |
|---|---|
| Modulation | 16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, QPSK |
| Frequency band | 2.4 - 2.484 GHz |
| Operating modes | Access Point (AP), Client Bridge, Repeater, Router, WDS Access Point (AP), WDS Bridge |
| Channel bandwidth | 40 MHz |
| Channels quantity | 11 channels |
| Transmitting power | 19 dBmW |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3af |
| Virtual LAN features | Tagged VLAN |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Maximum data transfer rate | 300 Mbit/s |
| Quality of Service (QoS) support | Yes |
| Antenna features | Detachable antenna |
| Antennas quantity | 2 |
| Antenna connector type | SMA |
| Antenna gain level (max) | 5 dBi |
| Placement | Table |
| Certification | FCC, CE, IC |
| Product color | Black, Grey |
| WAN connection | Ethernet (RJ-45) |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| VPN support | IPsec, L2TP, PPTP |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, 802.1x RADIUS |
| Number of SSID supported | 4 |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| AC input voltage | 90 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power requirements | 12V/1A DC |
| Cables included | LAN (RJ-45) |
| Flash memory | 4 MB |
| Internal memory | 32 MB |
Weight and Dimensions| Depth | 135 mm |
|---|---|
| Width | 105 mm |
| Height | 30 mm |
| Weight | 280 g |
| Dimensions (WxDxH) | 105 x 135 x 30 mm |
Explains how to use the ECB300 as a wireless dongle to connect a PC to an Access Point.
Details how the ECB300 functions as a central connection point for wireless clients.
Describes how the ECB300 provides Internet access to wireless clients via its DHCP server.
Explains the function of regenerating or replicating weakened wireless signals to extend network range.
Instructions for switching between the device's six different operational modes.
Configures basic wireless settings such as Radio, Band, Mode, and SSID for the device.
Sets up wireless security settings, including encryption methods like WEP, WPA-PSK, and WPA-RADIUS.
Procedure for downloading and installing the latest firmware to update the device's software.
To Next Page
