Need help?Do you have a question about the EnGenius ECB600 and is the answer not in the manual?
Operating Environment| operating temperature range | 32 to 122°F / 0 to 50°C |
|---|---|
| storage temperature range | -4 to 140°F / -20 to 60°C |
| operating humidity | 90% or less |
Power| power adapter voltage | 12V |
|---|---|
| power adapter current | 2A |
| power connector | DC IN |
Antenna| antenna type | External/detachable |
|---|---|
| antenna gain | 5 dBi |
| 2.4 GHz detachable antenna | x2 |
Weight and Dimensions| width | 5.5” |
|---|---|
| length | 7.3” |
| height | 1.14” |
Provides guidelines for optimal placement to maximize wireless signal range and performance.
Outlines the necessary TCP/IPv4 configuration steps for Windows operating systems.
Explains how to access and navigate the ECB600's web-based management interface.
Describes the ECB600's operation as a central wireless access point for clients.
Details how the ECB600 acts as a wireless adapter to connect to an access point.
Explains configuring the device for Wireless Distribution System (WDS) connectivity.
Covers using WDS to wirelessly connect different Local Area Networks.
Describes how to extend wireless coverage by regenerating signals.
Enables selection of the device's functional mode (e.g., AP, Client Bridge).
Allows configuration of the device's IP address, subnet mask, and gateway.
Configures basic wireless network parameters like SSID and channel.
Sets up encryption methods (WEP, WPA/WPA2) and authentication.
Configures connections for Wireless Distribution System (WDS) links.
Provides instructions for updating the device's firmware.
To Next Page
