EnGenius EOC1650 User Manual

EnGeniusEOC1650
WirelessAccessPoint&ClientBridge












User’sManual



Version: 2.0

EnGenius EOC1650 Specifications

General

Frequency Band	2.4 GHz / 5 GHz
Power over Ethernet (PoE)	802.3af
Operating Temperature	-20°C to 70°C
Antenna Connector Type	RP-SMA
Operating Mode	Access Point, Client Bridge, Client Router, WDS
Security	WPA, WPA2
Humidity	90% or less (non-condensing)
Ethernet Ports	1 x Gigabit Ethernet
Interface	Web-based management

Summary

2 Understanding the Hardware

2.1 Hardware Installation

Step-by-step guide for physically installing the EnGenius EOC1650 device.

2.4 IP Address Configuration

Instructions for configuring the PC's IP settings to match the device.

3 Switching Operating Modes

3.1 Logging In

Details the process of accessing the device's web interface for configuration.

4 Access Point Operating Mode

4.1 Logging In

Steps to log into the device's interface in Access Point mode.

4.3 System

4.4 Wireless

Configuration of wireless network settings, security, and advanced options.

4.5 Management

4.2.1 Main

4.3.1 System Properties

4.3.2 IP Settings

4.4.1 Wireless Network

4.4.2 Wireless MAC Filter

4.4.3 WDS Link Settings

4.4.4 Wireless Advanced Settings

4.5.1 Administration

4.5.4 Backup/Restore settings, Reset to factory default settings

4.5.5 Firmware Upgrade

4.5.8 Diagnostics

5 Client Bridge Operating Mode

5.1 Logging In

5.3 System

5.4 Wireless

Configuration of wireless network settings, security, and advanced options.

5.5 Management

5.2.1 Main

5.2.2 Connection Status

5.3.1 System Properties

5.3.2 IP Settings

5.4.1 Wireless Network

5.4.3 Wireless Advanced Settings

5.5.1 Administration

5.5.3 Backup/Restore settings, Reset to factory default settings

5.5.4 Firmware Upgrade

5.5.7 Diagnostics

6 WDS Bridge Operating Mode

6.1 Logging In

6.3 System

6.4 Wireless

Configuration of wireless network settings, WDS links, and security.

6.5 Management

6.2.1 Main

6.2.2 WDS Link Status

6.3.1 System Properties

6.3.2 IP Settings

6.4.1 Wireless Network

6.4.3 WDS Security

6.4.4 Wireless Advanced Settings

6.5.1 Administration

6.5.3 Backup/Restore settings, Reset to factory default settings

6.5.4 Firmware Upgrade

6.5.7 Diagnostics

7 Client Router Operating Mode

7.1 Logging In

7.3 System

7.4 Router

Configures WAN, LAN, and VPN settings.

7.5 Wireless

Configuration of wireless network settings, security, and advanced options.

7.6 Management

7.2.1 Main

7.2.3 Connection Status

7.3.1 System Properties

7.4.1 WAN Settings

7.4.1.1 WAN - DHCP

7.4.1.2 WAN - Static IP

7.4.1.3 WAN - PPPOE

7.4.1.4 WAN - PPTP

7.4.2 LAN Settings

7.5.1 Wireless Network

7.5.2 Wireless Security

7.5.3 Wireless Advanced Settings

7.6.1 Administration

7.6.3 Backup/Restore settings, Reset to factory default settings

7.6.4 Firmware Upgrade

7.6.7 Diagnostics