EnGenius EOC1650 - 6.5 Management; 6.5.1 Administration

EnGenius EOC1650 Wireless Access Point / Client Bridge Version 2.0
49


 DataRate:Ifyouwouldliketoforceadatarate,youmayselectonefromthedrop‐downlist.
However,forbestperformanceitisrecommendedtousetheAutosetting.
 TransmitPower:Youmayhavethedifferentapplicationdistanceofthedevicebyselecting
a
valuefromthedrop‐downlist.Thisfeaturecanbehelpfulinrestrictingthecoveragearea
ofthewirelessnetwork.
 Fragment Length: Packets over the specified size will be fragmented in order to improve
performanceonnoisynetworks.
 RTS/CTS Threshold: Packets over  the specified size will use
the RTS/CTS mechanism to
maintain performance in noisynetworks and preventing hiddennodes from degradingthe
performance.
 ProtectionMode:Ifyourwirelessnetworkisusingboth802.11band802.gdevicesthenitis
recommended to enable this feature so that the 802.11b devices will not degrade the
performanceof
802.11gdevices.
 WMM:
EnablewirelessQualityofService
 Distance(1‐30km):Specifyadistancebetween1and30Km.
 ClickontheApplybuttontosavethechanges.



6.5 Management
 Clickon theManagementlinkonthenavigationdrop‐
down menu. You will see seven options:
Administration, SNMP Settings, Backup/Restore
Settings, Firmware Upgrade, Time Settings, Log and
Diagnostics.Eachoptionisdescribedbelow.




